Ten problems needing attention in the use of touch computer all-in-one machine

Ten problems needing attention in the use of touch computer all-in-one machine

Touch computer all-in-one machine is an electronic product widely used by people to handle business and query information. Attention should be paid to:

1. The touch screen is made of glass with sharp edges and corners. Gloves / fingertips are required for assembly

2. The touch screen is fragile glass. Do not exert strong impact on the touch screen during assembly.

3. The film surface of the touch screen is the touch surface, that is, the front of the product; The glass surface is a non touch surface, that is, the back of the product

4. Avoid directly taking the lead and picking up the touch screen, and avoid pulling the lead out part.

5. The reinforcing plate of outgoing line shall not be bent.

6. Any part of the outgoing line shall not be folded in half. During assembly, the outgoing line must be inserted horizontally, not folded at the root of the reinforcing plate.

7. When taking and placing the product, it is required to operate on a single piece and handle it gently to avoid scratching the product surface due to product collision.

8. When cleaning the surface of the product, please wipe it with soft cloth (deer skin) dipped in petroleum ether.

9. Do not stack touch screens, use tray.

10. Finally, note: do not use corrosive organic solvent to wipe the touch screen film surface. Such as industrial alcohol.