When we make a large screen, we sometimes consider the splicing method of arc LCD splicing screen. First, we consider the beauty and personalization of arc. Second, some rooms are designed as arc, so that when installing the display wall, it can be integrated with the decoration and designed as arc, which will achieve better display effect, such as the exhibition halls of some enterprises Museums often use this method, so how to do the arc LCD splicing screen?
1. Conditions for arc installation
The LCD large screen splicing wall is not installed when you want to install it. Compared with the conventional installation, it consumes more energy and time, and has high requirements for the installation environment. First, the installation space should be large enough. In addition to the left and right width, it also has higher requirements for depth. Because it is an arc installation, the screens at the left and right ends will be closer to the front, so the space is required to be large enough.
Secondly, the number of splices should be more than 5 columns, so as to make radians, otherwise the effect is poor.
2. What occasion can I use arc
1) The room itself is curved. At this time, in order to adapt to the shape of the room, the LCD large screen splicing wall can also be made into an arc, such as some exhibition halls, command centers, etc.
2) Personalized display platform. In some occasions that pursue personalization, in order to achieve the difference from conventional display, special-shaped installation is sometimes used, among which arc is a common one.
3. How to realize arc splicing
Since it is spliced into an arc, most of them are solved in the later installation. There are two parts involved here, one is the preliminary scheme design, and the other is the later technical installation.
We should design the scheme in advance according to the size of the room and the shape of the background wall. If the background wall is also arc-shaped, it can be consistent with it at this time, so that the whole effect will be more unified after splicing. In general, when designing an arc, first of all, the number of screens should not be too small, especially the number of columns. It should be at least 5 columns, because the number of columns is too small to produce an effect. In addition, the radian is not easy to be too large, usually between 170 ~ 178 degrees. If the radian is too small, the arc is not natural. This can be determined according to the specific number.
Therefore, if users want to design an arc-shaped LCD splicing screen, they should first consider whether their installation environment is allowed, followed by the preliminary design scheme, including the occupation of space by the size of radian, the impact of quantity on the effect, etc., and finally find an experienced manufacturer for construction to ensure that the installation can proceed smoothly.